The Prizm can finally be overclocked, or underclocked, at will! Want to play a game faster? Want to slow down operations to save your battery life a bit? Now you can overclock up to 94.3MHz, or underclock to as low as 3.6 MHz at the touch of a few keys! A very handy, small utility (under 30KB for the add-in), pick it up today and have even more control over your device! Now updated, so you can change your ICLK CPU clock division ratio to crank a teeny bit more speed out! You can also monitor the other bus speeds on your calculator, and now safely clock up to 94.3 MHz!
BLOX2: Voltage Control For The CPU!
Add-in now also has functionality to:* show your battery voltage (via [Up]/[Down] selection or [Menu] shortcut);* reset the calculator (via [Up]/[Down] selection - useful for anyone who disabled the reset button at back of the calculator);* setup auto power off for any amount of minutes interval between 1 and 120 minutes. ([Shift]then [Menu] to setup then [Up]/[Down] to increase/decrease)* replace Conversion add-in - just rename this add-in to Conv.g3a and it will enable the same in RunMat (i.e. [Optn] then [F6] in RunMat will have Convert above [F1])* other small improvements (Unadmissable characters filter, USB protection)
Power Utils lets you change your Backlight and Power Off timeouts to values other than the presets in Settings! You can save your battery by having a power off timeout of 1 minute instead of 10 minutes! You can also (temporarily) change your LCD brightness either to the max or the min (completely off). You can also check the exact voltage of your batteries! 2ff7e9595c
Comments